Ping G730 Irons (Steel Shaft)
Reference: GO-36256
Maximizing distance was the primary objective in what is PING’s longest and most forgiving iron to date. It’s not just distance but distance with max height and increased forgiveness for shots that hit and hold the green.
By employing hyper 17-4 stainless steel through heat treating, engineers thinned the face to increase flexing and help lower the CG, delivering higher launching shots with ball-speed gains of up to two miles per hour for approximately five more yards of distance.
The bigger head and wider sole in the investment cast design increase the MOI in both axes, elevating forgiveness for improved accuracy. Golfers will also notice more offset, and the cavity-back design is supplemented with the proven PurFlex cavity badge that enhances feel and produces a more powerful sound.
Custom-engineered lofts help increase distance with an eye toward optimizing gaps. The set’s four wedges feature machined faces and grooves for added control. The option of power and retro spec lofts allows fitters to further optimize performance.
- Hyper 17-4 stainless steel face is thinner for more flexing to increase launch angle for distance with stopping power
- Investment cast larger head with more offset and wide sole increase MOI and forgiveness
- PurFlex cavity badge technology improves feel and helps deliver powerful sound
- Tungsten toe screw and shaft tip weights for swing weight fine tuning
- Lofts custom-engineered for added distance and better gapping
- Machined faces and grooves in four wedges for better control
- Stock shaft: True Temper Dynamic Gold 100 to promote higher launch with stable feel
SPECIFICATIONS
Club | Length | Standard Loft | Power Spec Loft | Retro Spec Loft | Lie | Offset | Bounce | Swing Weight |
5 Iron | 38 1/2" | 21.5° | 20° | 23.5° | 61° | 0.26 | 6° | D0 |
6 Iron | 37 3/4" | 24.5° | 23° | 26.5° | 61.5° | 0.23 | 7° | D0 |
7 Iron | 37" | 28° | 26.5° | 30° | 62° | 0.20 | 8° | D0 |
8 Iron | 36 1/2" | 36.5° | 32° | 30.5° | 62.8° | 0.18 | 9° | D0 |
9 Iron | 36" | 36° | 35° | 37° | 63.5° | 0.15 | 9.5° | D0.5 |
W | 35 1/2" | 40° | 40° | 40.5° | 64.1° | 0.12 | 9.5° | D2 |
UW | 35 1/2" | 45° | 45° | 45° | 64.1° | 0.11 | 11° | D2 |
W 50 | 35 1/2" | 50° | 50° | 50° | 64.1° | 0.11 | 12° | D2 |
W 56 | 35 1/4" | 56° | 56° | 56° | 64.4° | 0.09 | 12° | D3 |
NOTES
- These are design specifications that may vary due to manufacturing tolerances.
- Lie angle is based on Black Color Code at standard length.
- Power Spec Loft is a fitting option for players looking to boost their iron distance or decrease spin to hit a desired trajectory window. This custom-designed loft configuration delivers a calculated power boost without sacrificing the integrity of the club’s design.
- Club bounce angles will vary slightly if ordered with non-standard loft specs.
- Standard swingweights for graphite-shafted clubs are 2 to 3 points lighter than shown, depending on shaft flex.
- Standard swingweights with Alta Distanza graphite shaft clubs are 2 to 5 points lighter than shown from - longer clubs are lighter.
- Achievable swingweights depend on shaft, length and grip combinations.
- Available in left- and right-handed models.
SHAFT OPTION
Shaft | Flex | Weight | Launch Angle |
---|---|---|---|
True Temper Dynamic Gold Mid 100
|
R300 | 105.0g | Mid |
S300 | 105.0g | Mid | |
True Temper Dynamic Gold Mid 115
|
S300 | 115.0g | Mid |
X100 | 116.0g | Mid | |
PING AWT 2.0
|
Regular | 98.0g | Mid High |
Stiff | 104.0g | Mid | |
X-Stiff | 119.0g | Low Mid | |
True Temper Dynamic Gold
|
S300 | 124.0g | Low Mid |
X100 | 124.0g | Low | |
True Temper Dynamic Gold 105
|
R300 | 95.0g | Mid |
S300 | 97.0g | Mid | |
True Temper Dynamic Gold 120
|
S300 | 112.0g | Low |
X100 | 114.0g | Low | |
KBS Tour
|
Regular | 104.0g | Mid |
Stiff | 114.0g | Mid | |
X-Stiff | 124.0g | Low Mid | |
Nippon N.S. Pro Modus 3 105
|
Regular | 103.0g | Mid High |
Stiff | 106.0g | Mid High | |
X-Stiff | 112.0g | Mid High | |
True Temper Elevate MPH 95
|
Regular | 93.0g | High |
Stiff | 94.0g | High |
NOTE: Shaft weights listed are based on the trimmed length of a 7-iron and may not match the specs on the shaft manufacturer’s websites.
GRIP OPTION
Grip | Grip Size | Description |
---|---|---|
Lamkin Crossline Black |
+1/32 Std -1/64" -1/32" |
The Crossline Black is built with a highly durable compound, giving it premium torsion control for improved shot shaping, and with enough tackiness and firmness to provide excellent feedback. |